WELCOME TO ENCON

We're glad to establish energy saving at higher Airflow performance after the replacement of existing CT Fan Blade Assembly with Encon make aerodynamic design high efficiency E-Glass Epoxy FRP Fan Assembly. We're also satisfied with their prompt after sales service for the customer support to avail energy saving benefits to TIFERT, Tunisia.

We have observed energy saving of minium 20% to over 35% at same operating conditions after the replacement of our existing Air Fin Cooler Fans with Encon make high efficiency E-Glass Epoxy FRP Fans. We're also satisfied with their prompt after sales service for installation & PG test of the Fans to BPCL, Mumbai Refinery.

We're glad to observe energy saving of over 25% at same operating performance conditions after the replacement of our existing Air Cooled Condenser Fans with Encon make E-Glass Epoxy FRP Fans. We wish them to continue to put-forth their sincere efforts to support every industry to benefit energy conservation with their quality products at all times

We feel privileged to comment that there has been energy saving of over 20% at same airflow delivery performance compared to our existing Man Cooler Fans by Encon FRP Fans after the replacement which are operating without any wear & tear and loss of performance since the installations of the same till date. We further value the customer support & after sales service rendered by Encon & wish them to continue their positive efforts in promoting the noble casue of energy conservation with their products to cater the industrial demand.

Encon has suppkied & successfully commissioned their energy saving FRP Fans in our existing Cooling Towers with an energy saving of 25% at same operating Air flow duty conditions after the replacement & are operating satisfactorily without any wear and tear & loss of performance till date.

Encon has supplied & successfully commissioned their Pultruded technology Counter Flow design Cooling Towers while replacing our existing conventional design Cooling Towers & we're glad to comment that thsir supplies are satisfactorily operating as per the performance guarantee without any loss of performance since the installation to till date

Encon have redesigned our existing Cooling Tower with Trickle Fills, support structures & other modifications required for thermal upgradation / efficiency improvement of the Cooling Tower. It is observed that after the modification done by Encon, the cooling water temperature is reduced by 2 degree C in comparison to the earlier performance of Cooling Tower

Encon provided their service team for complete installation with their Trickle Fill to enhance the CT efficiency in our existing Cooling Tower. We feel privileged to comment that there has been improvement by 10% in the overall efficiency of each Cell & as a result, we are able to keep one Cell idle during peak summer season, The above Cooling Tower modification with Encon's technoclogy has benefitted to maintain better process condition.

Encon has successfully supplied, supervised & commissioned the Wind Wall project for Cooling Tower efficiency improvement in our 2 x 600 MW Unit. The Cooling Tower performance improved by an average of 1.4 degree C in the cold water temperature in the basin. We wish Encon to continue to put-forth their sincere efforts to support & benefit energy conservation in the national interest.

We have observed over 20% energy saving at same performance conditions after the replacement of out existing CT fans with Encon make E-Glass Epoxt FRP Fans & are alos satisfied with the after sales service & customer support provided by Encon.

We feel previleged to state that there has been more than 25% energy saving after replacing our existing CT Fans with Encon make high efficiency Fans. Encon Fans are operating withour any performance loss since the time of installation to till date.