Encon Group has installed a 3,200 CMH Counter Flow Cooling Tower - featuring 1 tower with 4 cells

         Installation Capacity: 3200cmh TOTAL CAPACITY (CMH) 3200 CAPACITY PER CELL (CMH) 800 NO. OF TOWER 01 NO. OF CELLS

Encon Group has installed a 9,600 CMH Counter Flow Cooling Tower - featuring 1 tower with 6 cells

1)    Installation Capacity: 9600 cmh TOTAL CAPACITY (CMH) 9600 CAPACITY PER CELL (CMH) 1600 NO. OF TOWER 01 NO. OF CELLS 06

Encon Group has installed a 14,400 CMH Counter Flow Cooling Tower - featuring 1 tower with 9 cells.

Installation Capacity: 14400 cmh   TOTAL CAPACITY (CMH) 14400 CAPACITY PER CELL (CMH) 1600 NO. OF TOWER 01 NO. OF CELLS 09 HOT WATER TEMP (°C)

Encon Group has installed a 6400 CMH counter-flow cooling tower system - featuring one tower with four cells.

Installation Capacity: 6400 cmh  TOTAL CAPACITY (CMH) 6400 CAPACITY PER CELL (CMH) 1600 NO. OF TOWER 01 NO. OF CELLS 04 HOT WATER TEMP (°C) 34

Encon Group has installed a 9600 CMH counter-flow cooling tower system - featuring one tower with six cells.

Installation Capacity: 9600 cmh  TOTAL CAPACITY (CMH) 9600 CAPACITY PER CELL (CMH) 1600 NO. OF TOWER 01 NO. OF CELLS 06 HOT WATER TEMP (°C)

Encon Group has installed a 4000 CMH counter-flow cooling tower system - featuring one tower with two cells.

Installation Capacity – 4000 cmh  TOTAL CAPACITY (CMH) 4000 CAPACITY PER CELL (CMH) 2000 NO. OF TOWER 01 NO. OF CELLS 02 HOT WATER TEMP (°C) 45

Encon Group has installed a 14000 CMH counter-flow cooling tower system

Installation Capacity: 14000 cmhTOTAL CAPACITY (CMH)14000CAPACITY PER CELL (CMH)2800NO. OF TOWER01NO. OF CELLS05HOT WATER TEMP (°C)42COLD WATER TEMP (°C)32WET BULB TEMP (°C)28FILLOPTI GRID 

GRASIM VILAYAT - Installation Capacity : CS2 PLANT

TOTAL CAPACITY (CMH) 2125 CAPACITY PER CELL (CMH) 425 NO. OF TOWER 02 NO. OF CELLS 05 HOT WATER TEMP (°C) 40 C

GRASIM INDUSTRIES LTD. - Installation Capacity - 1300 CMH

  CAPACITY PER CELL (CMH) 1300 CAPACITY PER CELL (CMH) 650 NO. OF TOWER 02 NO. OF CELLS 01 HOT WATER TEMP (°C) 42 COLD WATER T

Suppply of 2116 M3 per Hr-1 Cell-705 TR-IIDCT FRP Pultruded Cooling Tower

Fills – Critical component for Cooling Tower Operation

PROJECT  Supply and Installation of advanced Trickle Grid Fills for Cooling Tower Performance improvement of CT#3 (6 Cells – 13000 CMH) CHALLENGE & EXECUTION  Hindalco RPD was distressed with the poor performance of their exi

Improvement of Condensing Duty by changing our existing Fin Fan blade angle in Petrochemical Industry

REVAMPING PROJECT BPCL’s Mumbai RFU has undergone a major revamp in September 2021 to increase the design capacity from 3600 MTPD to 6000 MTPD. On 6th November 2021, RFU started processing 6000 MTPD of feed from CDU 3 stabilized naphtha and CDU4 stabilized naphtha. CHA

Cooling Tower Performance Improvement by supervising and installing Wind wall

PROJECT  Supply and Erection of Wind Wall Partition for Cooling Tower Performance improvement for 44 Cells (11Cells × 4 CT) with Pultruded FRP Structure. EXECUTION  Encon supplied FRP Structural material along with wind wall panels and provided Service team f

Transformation of existing Cross flow Timber Tower with Counter flow FRP Tower in record time

PROBLEM STATEMENTTo replace existing Sigma Cooling Tower with Counter flow Pultruded FRP Cooling Tower in existing basin which offers high thermal efficiency and reduce maintenance to reduce the power consumption in Howden and Syn gas compressor.The quintessence of this project is the

Cooling Tower Thermal capability improvement

PROBLEM STATEMENT  Improve the thermal efficiency improvement of an induced draft cooling tower to reduce cold water temperature for an increase in overall plant production efficiency.Thermal Understanding of Fills The heat transfer rate in a wet cooling tower system is directly dependent